The Super Titan 3000 Weld-on Trailer Hitch w/ 3" Receivers like part # 38023 all require welding. They are universal hitches which require fabrication and modification for installation. In order to achieve the full capacity of the hitch, there will need to be welds throughout for support. view full answer...
The bolt holes on the Curt Trailer Hitch Receiver # C15302 sit across from each other 39" on center and are separated front to back by 7-1/2" on center. This is a custom fit for the following vehicles:
2008 - 2010 GMC Sierra 2500 - 6-1/2 Foot Bed
2007 - 2007 GMC Sierra New Body 2500 - 6-1/2 Foot Bed
2008 - 2010 Chevrolet Silverado 2500 - 6-1/2 Foot Bed
2007 - 2007 Chevrolet Silverado New Body 2500 - 6-1/2 Foot Bed
2001 - 2006 GMC Sierra 2500 HD - 6-1/2 Foot Bed
2007 - 2007 GMC Sierra Classic... view full answer...
The Super Titan 4000 Weld-On Trailer Hitch part # 38124 is a weld on application and does not come in a bolt on version. All of our heavy duty truck hitches are weld-on but the Buyers Products Class 4 Service Body Long Hitch Receiver part # 3371801055 can be welded or bolted on. It does come with the hardware to bolt it on. The maximum gross trailer weight is 10,000 lbs. view full answer...
The Super Titan 4000 Weld-On Trailer Hitch part # 38124 will fit your 1995 International 4700 Series truck if the frame is approximately 34-1/4" to 34-3/4" which is the standard width of a cab and chassis frame. It is a weld on application so you would need to weld it on yourself or have a professional welder weld it for you. view full answer...
The label side of the Tuson Electronic Sway Control System for Electric Trailer Brakes # 335TSC-1000 needs to face forward and be in a vertical orientation perfectly centered on the trailer 5-10 feet back from the center of the king pin like what you see in the picture I attached.
That said, for the type of sway you are experiencing your best solution it so move your axles further back on your trailer. view full answer...
We are going to need to know the wheel bolt pattern on your trailer before we can pick out replacement wheels. The wheel you referenced # LHACK133 has an 8 on 6-1/2 inch bolt pattern. I attached a help article that covers determining bolt patterns as well.
What capacity axles do you have on your trailer? Most likely they are 3,500 since that is the very common capacity for 10 inch assemblies. For that you would need the part # AKEBRK-35R-SA for the right hand side and # AKEBRK-35L-SA for... view full answer...
The best option we have available for your International 4700 is the Buyers Products Class 4 Hitch Receiver # 3371801055. This can be either bolted or welded to the bottom of the frame rails on your truck and it features a long receiver design to help clear the flat bed for easier access. It has a towing capacity of 10,000 pounds and a tongue weight limit of 1,000 pounds.
I have attached a short video review that you can check out as well. view full answer...
Hey James, dimensionally the Buyers Products hitch plate part # 3371809061A will match up to the frame rails of your International but beyond that most likely would need to get welded in place as the holes wouldn't line up. view full answer...
The width of the tab you marked in your picture is 2.9" and the height is 6.32". I have attached the full dimensional drawing of the # 3371809065 below for your reference. view full answer...
Yes, the installation of a brake controller is generally the same for vehicle's that have no factory tow package, which is what your 1968 Chevy C50 most likely needed as well. I have linked a Help Article on installing a brake controller from scratch for you to check out.
For your 1995 International 4700 series, I recommend the # ETBC7 kit this will transform a 4-way connection to a 7-way vehicle connection. If you currently don't have a 4-way connection then you will want # C59496. ... view full answer...
Before you do anything else you will want to see if there is a brake switch above the brake pedal. If there is, then use a circuit tester such as # PTW2993 to test the wires. You are looking for one that only has power when you step on the brake pedal. If it has power with the head lights or turn signals on it is not the correct wire. A lot of vehicles with air brakes do not have this wire which connects to the brake controller red wire.
Based on what I was able to find there should be... view full answer...
The best option we have for your 2001 International 4700 is going to be a weld-on hitch plate. Unfortunately there are no bolt on options available for your truck. Make sure to use an experienced welder for installation of the hitch plate. We have the following hitch plates available:
Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 22-1/2" # 3371809043
Buyers Products Fabricators Hitch Plate - 1/2" x 34-5/8" x 15-5/8" # 3371809040
Buyers Products Fabricators Hitch Plate -... view full answer...
According to Buyers Products, the # 3371809065 is designed to fit the Chevy/GMC model 3500 cab and chassis. For your 1996 International 4700 LPX you will need to use a universal weld-on hitch plate. Unfortunately, there are no custom hitch plates available that will fit your truck. We have the following options.
Buyers Products Fabricators Hitch Plate - 3/4" x 34-1/2" x 22-1/2" # 3371809027A
Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 15-1/2" # 3371809042
Buyers Products... view full answer...
Go To Results